Description
24mm Super Strong Solenoid Valve Operating Magnet – 40kg Pull Force
The SVOM-24 Super Strong Solenoid Valve Operating Magnet is the largest and most powerful operating magnet in the Connexion range, designed for the manual operation, testing and commissioning of large industrial solenoid valves without electrical power.
Delivering an impressive 40kg pull force and 40,000 Gauss magnetic flux density, the SVOM-24 contains three high-strength N42 NdFeB Neodymium magnets encapsulated within a durable ABS housing. This exceptional magnetic strength allows engineers to manually operate large process valves, high-pressure solenoid valves and oversized armatures that cannot be reliably operated using standard commissioning magnets.
Ideal for maintenance engineers, refrigeration specialists, utilities, process industries and plant operators, the SVOM-24 provides a safe and convenient method of manually energising solenoid valves during commissioning, servicing, fault diagnosis and emergency operation.
Designed for Large Industrial Solenoid Valves
Unlike standard operating magnets, the SVOM-24 has sufficient magnetic force to operate many large process solenoid valves used throughout industry.
For solenoid valves exceeding 24mm armature tube diameter, the magnet can often be placed directly onto the top of the armature tube, where the concentrated 40kg magnetic pull force can lift the armature into the energised position.
This makes the SVOM-24 particularly useful for:
Large process solenoid valves
High-pressure solenoid valves
Steam systems
Water treatment plants
Chemical process equipment
Refrigeration plant
Industrial gas systems
Utilities and power generation
Manufacturing and processing facilities
How the Solenoid Valve Operating Magnet Works
The SVOM-24 replaces the electrical coil during maintenance and commissioning operations.
- Isolate the electrical supply.
- Remove the solenoid coil.
- Place the operating magnet over the armature tube or valve stem.
- The magnetic field lifts the armature into the energised position.
- Refit the solenoid coil when normal operation is required.
This allows engineers to operate valves manually without wiring temporary electrical supplies or energising the system.
Manual Adjustment of Electronic Expansion Valves (EEV)
The Connexion 40KG permanent commissioning magnet can also be used to manually operate compatible Electronic Expansion Valves (EEVs) in refrigeration, air conditioning, HVAC and heat pump systems.
If the EEV coil or electronic controller fails, the powerful neodymium magnet can be rotated around the valve's magnetic actuator to manually adjust the valve opening without electrical power.
Clockwise rotation: Increases valve opening on the demonstrated EEV.
Anti-clockwise rotation: Decreases valve opening on the demonstrated EEV.
Ideal for: Emergency adjustment, commissioning, fault finding and maintenance.
This provides a practical temporary solution for controlling refrigerant flow while electrical faults are investigated.
Important: Rotation direction and compatibility depend on the EEV design. Adjustment should only be undertaken by qualified refrigeration engineers following the valve manufacturer's instructions, while monitoring system pressures, temperatures and superheat.
Construction & Specification
Model: SVOM-24
Bore Size: 24mm
Pull Force: 40kg
Magnetic Strength: 40,000 Gauss
Magnet Type: N42 NdFeB Neodymium
Housing Material: ABS
Magnetic Configuration: Axially Polarised
Maximum Temperature: +250°C
Typical Applications
Solenoid valve commissioning
Solenoid valve testing
Solenoid valve manual override
Emergency valve operation
Plant maintenance
Refrigerant recovery systems
Process control systems
Water and wastewater treatment
Steam and condensate systems
Industrial automation
EEV Valve Manual Adjustment
Safety Information
Due to the extremely powerful magnetic field generated by the SVOM-24:
Keep away from heart pacemakers and implanted medical devices.
Keep clear of credit cards and magnetic storage media.
Avoid placing near sensitive electronic equipment.
Always isolate electrical power before removing a solenoid coil.
Related Products & Categories.